20+ Dubai style gold ring designs images for female


Dubai style gold ring designs images for female
 Ring designs 

how to do this Wire free form ring and fittinginto this dome shape. Are you ready? Let's get started 

  To start our ring, we're gonna start at front view.

 Let's set the diameter for 16 millimeter, then we want to come into theright view to set up our profile for the dome. The one on the top, I'm going to snap into the quadrant, and I want to make it a little bit wider, so maybesomething like this roughly about 10 millimeters wide. If it is too tall, youcan adjust the high if you want to, and then let me close it over here, the otherone we could just mirror this one or we can draw another one. I'm just gonnamirror it to the other side, and make sure that you want to use the scale3d tool to scale it down something like that.


Dubai style gold ring designs images for female
 Ring designs 


 Okay watch out the thickness, youdon't want it to be too thin, otherwise, you may have a casting issue, or it'schanging too dramatic. Let's go ahead to join both of the arc and a line together.We are going to making the surface, let's do the sweep one rail. Thisis your rail go from here to here, and then hit Enter. Normally I will have itright in the middle, because that's where the seam is, and so we're just gonna keeplike that, and then we want to close the sweep to get our dome ring first. 

Dubai style gold ring designs images for female
 Ring designs 


This is the dome ring and then we need to have an opening. 

We need to findthe edge for the thickness that we like for those two wall on the side. We'regonna extract Isocurve and then it's gonna pick up this surface, and I'm kindof eyeballing where I want this ring to be cut. So we don't want to dothe same thing on the other side. Best way to do is just mirror to the otherside on the top view. Let's hide the dome ring,and when we are looking at those.


Dubai style gold ring designs images for female
 Ring designs 


 Let's draw a curve, a straight line from themiddle and we simply just want to use a line move up a little bit, and to trimthe area that we don't want, which is on the bottom. Now we have this toshowing the thickness of the boarder, and we are going to connect this bottom tobe a round one, and let's go ahead to use the blend tool, and we're gonnabland from this end to that end, and then we're gonna blend it again from this endto that end. 

Dubai style gold ring designs images for female
 Ring designs 


I didn't adjust the length because I want to make sure both sidesthe same so I'll rather adjust the curve instead of adjust the length individually.Now we have this. Let's turn on our ring. This curve is notexactly on top of it, where the plane is not exactly on top of the surface.What we wanted to do is using the pull command, and we're gonna pull thiscurve back to this surface, and you can see now it is on this surface. We gonna make a copy of the ring, and then just hide it in case we need it later.We are going to split this surface by the curve over there.

Dubai style gold ring designs images for female
 Ring designs 


 Let meturn it in other colors, so you can see where that curve is. Now we have thesurface that we are going to work, so I want to offset the surface going in alittle bit. My wires is going to be 0.6 millimeters in diameter, so I'm going toflip it inside for 0.6 millimeter, and make sure solid=no, and we want tocreate a surface, so let's hide this one. 

Dubai style gold ring designs images for female
 Ring designs 


This will be the surface that wewant our curves to hop on it.

 So we also gonna hide this one to deal withthis surface only. The way I'm going to do is throw a bunch of the curves. or straight lines and you can be spontaneousor you can be like really into certain pattern. You might not want to have a toomany so once you have the piping you won't look like too crowded. Let'sgive it a try. We want to project this guy to this surface. Notice that becausethis is a projection, somewhere on this side you can kind of see this is gettingmore rounded instead of a straight line that we like. If you pipe it this guys,let's give it a try, then you will get something like this.

Dubai style gold ring designs images for female
 Ring designs 


 Ifthat is something that you like that's fine, we can go ahead and finish that, butI'm going to show you the second way to work with this. The second way we want tocreate UV curve, so we have a UV curve over there, and I'm going to useexactly the same curve maybe stretch a little bit for the comparison, and we aregoing to use this curve to trim everything else that is not inside ofthat area. Now this is our curve over there.watch out this point, it may have the problem on the piping. so I'm just gonnamove it outside and trim it again, and make sure you don't have anythinghanging inside. Otherwise, we'll see the end of the piping. Let'smaking this into a surface by surface from planar curve, and then we want tomove it this back to that surface. 

Dubai style gold ring designs images for female
 Ring designs 


We need to bring it back the rest of thering, and let's give it a try.

 We want to do flow along the curve, and wewant to pick up this end. We want to coming to the bottom, and pick up thisend. That will help on this surface. Notice that it's not the surfacethat we wanted to hop on we want to actually go down a little bit in thiscase I'm going to move this down 0.6 that way that will be hopping onthe surface over there. so let's do one more time, flow along the surface, andthen we want to go base over here, and clicking on over here. 

Dubai style gold ring designs images for female
 Ring designs 


So let's turn offthe ring, and you kind of see this is hopping on the surface really nice, solet's give it a try we want to pipe it and see what piping look like. alsoyou can notice that the line is still keep it straight looking, so it's not likeproject, it was kind of curved. We'll go ahead to use thepipe, and you want to set it up the same radius, and that will be the ring that wehave. 


Dubai style gold ring designs images for female
 Ring designs 


Let's bring back the rest of the ring, we also need to make sure thesurface in between is closed. First, let's duplicate the edges. Go allthe way around this guy, and also the edge from here all the way around. We canhave a perfect fit. And Let's joining it.Now it leaves us two curves. I just mark it in the red color, and then we canuse the loft tool, and we're gonna loft from here to here. 

Dubai style gold ring designs images for female
 Ring designs 


We want the seams to bealigned. 

I usually like to align to the tip of the circle or the quadrant orthe midpoint over there, and let's click ENTER. Then we'll get the very nicesurface there. We can kind of join it, and we can turn it on the curve that we have.You can also punch it through all the way to the end like what I have. 


Dubai style gold ring designs images for female
 Ring designs 


Whenyou punch it through all the way to the end just make sure that the loft isgoing from inside of a ring shank to the top of the Ring, and then you can dodouble of the same style then you will get this hollow form. 

Dubai style gold ring designs images for female
 Ring designs 

Dubai style gold ring designs images for female
 Ring designs 

Dubai style gold ring designs images for female
 Ring designs 
Dubai style gold ring designs images for female
 Ring designs 

Dubai style gold ring designs images for female
 Ring designs 

Dubai style gold ring designs images for female
 Ring designs 


Dubai style gold ring designs images for female
 Ring designs 



Post a Comment

0 Comments

Subscribe!

Get all latest content delivered straight to your inbox.