Dubai jewelry style pendant designs images

How to create this pendant for the resin filling are you ready let's get started!

We are going to start with the top view.Let's use the command. It's conic corner rectangle and we want to snappinginto the zero, hit Center and hit zero on it, and decided how big of yourpendants going to be. Mine is roughly going to be this size, and I'm gonnabring down the mouse, so I can have like cushion looking things. Alright so we'regonna do all the design within this area. We're going touse the command here is "flat spiral" and we are going to pick up this Center, andcoming in and if that is too much turn or not enough. You can actually changthe turn over here. Let's say something dramatic like 10, so you can havesomething like this.

Pendant designs images

I want something really minimal so that me do you 1.5, andlet me do something like this.

Okay, with this spiral, let me rotate it a littlebit, I gonna create the thickness for it, so simply, I'm going to use thecommands called "offset". Its living under the curve command, and you have this andgo into offset for 1.5 millimeter, so now we have something like this. I need tohave this become metal, so this need to be connected. The command we are going pendant design touse is under the curve, and we have "blend" tool. When we have a blandcurve, we have those adjustment that you can go ahead and try the best for youroption. So now I have a spiral look like this. Let's go ahead to join them. I'mgoing to use that and use the rotate tool, make sure copy=yes, and let'scopy this to the other side.

Pendant designs images

Tilted it into the anglethat you like, for example, something like this, and we're going to use the "blend"command one more time to blend from this end to that end, one more time fromthis end that end. Let's go ahead to join all of them. This is one of thedesign right there. You can make it bigger or smaller or tilt it to whateverthat gonna fit into your design. Once I have that, I would like to havethis to have a wall, so I'm going to offset one more time on this one, and 1.5 willbe fine for my design. I'm going to enlarge my design actually like itbleed to the outside pendant frame something like this, and let's go ahead to draw a bigcircle maybe something like this. Another one over here maybe a littlebit bigger. Now I have those, I'm gonnause the same command "offset" and let me offset over here, and offset over here,alright maybe I'm going to move those two closer, so they have a better contact.

Pendant designs images

All we need to do now is pick up everything, and we're gonna use the "trim"command to trim everything in the middle. So we can have all the metal iscontinuing in one single piece. Sometimes if you trim the wrong one,just CTRL+Z, it will go back to one step and maybe here. okay so it looksnice right there. As my design has a lot of point right there. It's not going pendant designs tobe good for casting. Any of the design like that.I always like to round the corner even something small like 0.1 mmhere it's not gonna change the design that much, but it was round offthose corner and reduced the casting issue that investment stay intothose round corners. Let's go ahead to round all of them, and you can make thema lot more rounded, if you want to.

Pendant designs images

Let's go ahead to pick up the outside.

Sometimes it's confusing looking all this patterns right there, so let's goahead to pick up the outside, and we want to go to the "solid- extrude planarcurve", we want to get it straight. Let me make it straight up for 4 millimeter.And that will be the thickness. I also wanted to have outline is rounded. so Iwant to make the radius, let's say 0.3 millimeter on this radius both onthe top and the bottom now let's pick up the rest of the curves,and we are going to move it up for 2.

Pendant designs images

Let's go ahead to "extrude planarcurve- straight" and over the boundary on the first extrusion. All we need to do is"Boolean Difference" then we will get our design here, and that is the area you aregoing to filling the different color of a resin. The rest of the design will bechoosing your preference bail, depends on what type of the cord or the chainthat you are using. I have this color block here just represent the color forthe resin. For your model on the 3D printing, you don't need to have thosecolor block.