Gold pendant designs images 2020

 Welcome back to imagesjewelrydesign website.
Gold pendant designs images
pendant designs

This channel is about sharing rhino3d knowledge to student and3d model professionals learning various Rhino3d techniques.



Today we would like totalk about is making this pendant that has some design on the side. I would liketo talk about where you can get an idea for the design and also how to you buildthis model.

Are you ready let's get started before we get starting our model. This isa wonderful website I would like to share with you. It is called Stuller.com. Itis a wholesaler website that you have to have a wholesale license in order topurchase pendant design from them. However, there are a lot of a good information on this website.They are the largest wholesaler in the United States, so if you go into theproduct they have all different product that you can take a look on it.especially if you look at the ring. Let's take a look on the ring. The good thingsthat I like is the image is really really big, and then they also..... most ofthe image they will give you the top, front, side view. so if you go into anythingthat you like, and you can click on any of them. and you can quickly to see theyhave the 3/4 view, and the front view already. so that helped you to understandwhat they look like in certain type of a design. 
Gold pendant designs images
pendant designs


Especially when you have certaintype of a twist, sometimes it's hard to know what the side view look like. sothis is a really good reference website for you. Even though you may not have alicense from them yet, but you will love the website. so what I'd like you to dois go into the website and type it the 4 prongs pendant design, and you willcome up all those 4 prongs pendant design but the one I would like you totake a look on it, is something like a little bit filigree style andand a good thing is when you go in, you can kind of enlarge it, so if you want toget a detail you can see all those really big image there, okay so there's alot of the design you can kind pendant design of explore it with them, like this kind ofscroll type of a design and also give you a good idea what is the thicknesspossible will look like. A lot of my subscribers, you guys are just startingwith a jewelry design and a lot of things about the casting, about athickness, about what is a end product should look like. This will be anexcellent website for you to explore okay so let's go back to our Rhino,and let's take a look what we're going to do today. I'm going to maybe make itinto the darker color so easier for you to see. Alright, so we are going to do afour prong design. One thing that I would like to mention right here.
Gold pendant designs images
pendant designs


This is theprong on the twelve o'clock, six o'clock ,and three and nine ,and this is the arrangementfor pendant.

A lot of time if you are doing a ring which is that the ringshank is gonna go with the 9 o'clock to 3 o'clock. your prong probably need tomove it like 45 degree. What I mean is the prong won't be oriented like this wayand it will most likely be oriented like 45 degrees almost like this way, okay. sothis is look nicer on the ring, because the prong is not gonna hit somethingelse and that's very small detail but if you are in the jewelry design youprobably pendant design need to know this. So let's go back to our topic today to make thispendant. Alright so for this pendant we are not gonna making the chain you cantake a look on my other video, that actually show you how to make chain andhow to, you know, make chain for the rendering. So I'm going to delete thisguy right here and we'll make this later so I'm going to hide this one as wellthat's just take a look on this. If you look atthis, before you actually start building all the parts, we have to look atoverall. You can see that this is if there's no pattern at all it could be acup of looking things. so what we like to do is we will build the cup just theshape of it, and we will actually make a UV curve and from there we'll do thedesign from there.
Gold pendant designs images
pendant designs

Let's start with a stone for any of the desired size youwant it so let's go to the top view at the top view I'm going to draw a circle.The first circle will be slightly smaller. This is where the bottom circlewill be, the second circle will be almost the same size of our stone. Okay and thenI'm looking at here my perspective (view) you see two circles. I'm going to move thefirst circle down and we want to move it lower then the culet,  which is thetip of the stone on the bottom, because we want to make sure that any thingsthat we are working on pendant design after we set the stone the culet, which is this pointright here on my right view, it won't stick it out so it won't scratch any ofyour skin. okay so I'm going to make this slightly smaller. and then I'm going tocreating a curve it's going to snapping from this point to this point. Tocreating the surface I'm going to go to the surface you have sweep2 and go torail1, rail2, and cross-section. You can make them puffier you're almoststraight it's really personal preference okay so with this we are going to createa UV curve you can go to curve- curve from the object- and then you have createUV curves. then let's snapping on this surface and hit Enter.
Gold pendant designs images
pendant designs


Then you will comeup this box right here this box means that surface it's completely flattenedout

This is the area going to be. okay so Ineed to have four prong and notice that the seam is on the 12 o'clock corner sowhich means right here on the left side this is well be the seam so left to theright those will be the same over there okay so I would like to do is tobreaking this full curve into 4 small curves, and then on the top and thebottom I'm going to be typing "divide" and I want to divide it into foursections, so that's also tell me where the prong location will be. so easily I'mgoing to put a curve from the point a point s,o that helped me to divided pendant design thiscurve into four equal sections, and then so that's where the prong is going to beand then we want to design within this area. okay so let's take a look what theprong will look like. With this (stone) is about 7 millimeters I would like to set myprong it's about one point two millimeter so I'm going to myrectangular and actually I like to use a conic corner, and I have explained thisin other video if you're interesting why do I like it, you can check on thosevideo. so let's go to the front view and then I'm going to type it 1.2that's for the length, and the other length is also going to be 1.2, and I'm just kind of moving with my mouse to see what is the shapelooked like. okay so this is where the area is going to have a prong, and I'mgoing to just have this one and then copy another one up here, and the reasonI want to get it longer is because I need to have a prong longer so myjeweler is able to set it, then I will have the command is called "loft" and Igo from here to there.
Gold pendant designs images
pendant designs

Hit Entere so then you have the prong, and let's go aheadand cap it. so now it is solid. okay so we have one there. All we need pendant design to do now ismaking a bunch of copies, and I wanna snapping into the end point. Let's gotake a look on the perspective (view), and snapping to the end point of each ofthem, so we know that we are designed within this area okay so now let's go tothe top and let's do our design. so our first design. it's going to be some sortof a shape.... I would like to actually put the point in the middle, so what I like todo is I'm going to go to the perspective view, and then using the split command,and pick up this one and then we want to split with this point, this point, and thispoint. So we kind of split them into four equal sections. So that way we cansnapping into pendant design the middle. Okay let's go back to the top view, and then we can doour design right here. So the first one I can snapping into the middle, and I kindof need to know how high they are going to be. The line right here on thetop, if you look back to our original one is almost just a little bit under thegirdle, right? So I don't want my design over or reach the girdle.
Gold pendant designs images
pendant designs


Actually I wantto be just a little bit lower than the girdle so I think that it's a goodposition right there. 

From there, I'm going to use my curve and snapping intothe endpoint, and kind of design some sort of leaf looking things, somethinglike this. Okay and I'm going to mirror that to the other side. Alright sothat's my first leaf, and it's really up to you. how you like them I actually likethem a little fat and so that will come up the bettercasting quality. and I'm going to use my ellipse tool on the second one with thediameter and I'm pendant going snapping into the quadrant - quadrant, and you want to go intothe front view to do it. Kind of using the prong to give me a good idea of howthick they should look like Alright so now this is my one of theprofile I'm going to make another profile with the same command going fromhere to here, and again, we won't go to the front view and we want to gosomething it's a little bit thin there to start with.Okay so now what we can do sweep 2. You're going to go to the surface andyou go to sweep2 rail. Rail1, rail2. You're gonna go from here to here. Nowvery pendant important things as you need to go to this point by clicking the point onthe top. I'm going to show you what happened if you don't do it. It will justgive you half of it, right? and then you probably need to do one more time here,here, and go from here to the point, and it looked like this not much different,because you can just join this one back but.
Gold pendant designs images
pendant designs

In fact you got this is a twosurface joined together, now you have a polysurface. what is the disadvantage isyou can not turn on the control point on the polysurface, so I want to turn it on itwill say "cannot turn on the point for polysurface". okay so I'm going to goback one step. that's do it one more time Sweep2, rail1,rail2, going here to here and then make sure do you click to the point. okayand now you look at this no seam pendant right in the middle, and what it does is if weneed to do additional editing, and then we can turn on a control points. that waywe can turn it on so this is really important step. A lot of people, just youknow, don't think this is not much different but it does make ahuge difference. okay so we want to cap it. so now we have that first one. okaythe the one on the side, I do like to do something more like this. Drawing a curveroughly here, and I want to coming up a little bit and do a little bit morecurve, or something like this, alright. and then you can simply pipe it or youcan use any of the profile that you wanted to do. I'm going to creating theprofile and again use the (rectangular) conic corner and with the center (option), so let's take a looksnapping into pendant the end point of this curve and then we want to go to thefront view and to holding the SHIFT kind of eyeball like the size that youlike, and then click on it so you will have this curve right there and let's goahead and sweep it, and see what does it look like. I'm going to use this sweep1 rail. I'm gonna click on this profile and then you have something like this.Okay, the one that we have and look like it is kind of inside of the shape and Ido like it to come up a little bit more.
Gold pendant designs images
pendant designs
Gold pendant designs images
pendant designs


Post a Comment

0 Comments

Subscribe!

Get all latest content delivered straight to your inbox.