Gold pendant designs for female

 Welcome back to imagesjewelrydesign website.
Gold pendant designs for female
 pendant designs

Today we are looking to how to create the spiral decoration for oval cabochonpendant.

Are you ready? Let's get started we're going to start at the top view,creating a sphere over there, and this will be the stone we want to create.let's gold pendant designs go ahead to make them into the oval. then we want to coming over againto the top view, and creating a box on the bottom half of the oval, and let's goahead to use a boolean difference this one out of this one. so then we can getthis cabochon. depends on how thin or how thick. Gold pendant designs there you can do 1d scale, ifyou want to. now we need to duplicate it find out how big of this one, so we canmake a bezel. I'm going to turn that into red colors.Gold pendant designs for female it is easier for you to see. nowwe have something there. I simply just want to creating a profile. it lookssomething like this, and that will be our bezel there. so I'm going to create another one.Make sure small track is on, so I can align with it. Let's go ahead to closethis guy and join them.



Gold pendant designs for female
 pendant designs



So now I have this. there are two way I can creating abezel over here. if I use the rail revolve it's gonna be the profile thiswill be the rail and the axis will start from the zero and up, and thenyou will get something like that. it looks fine but you also notice here onthe top is much thicker than the one on the side over here. so I'm going to doanother way moving the top on the side for the comparison.Gold pendant designs for female we're going to usethe sweep one. you're gonna have the rail and the cross section, so that way youcan maintain the same thickness closed on the top andthe side. so both will work just the one on the right side, it fit oval-shapedbetter. okay the second thing is we need to create that twisting element rightthere. so I'm going to again if you scale this up you're going to notice the topis going to be thicker because it's proportional scale. so instead of usingthe scale I'm going to use the offset I'm going to click on this one, and wewant to offset it for 1.5 millimeter so something like this.
Gold pendant designs for female
 pendant designs


We can scale it downif it is too much, but basically what

I wanted to do is create an element thatcan flow around this area. so I'm gonna use that curve and use thehelix. right here on the top you have around curve. let's click on this, anddepends on how many turns you want. in my case, I have a 10 turn there and then I'mgonna coming over to the top view, kind of a decided how big of the turn that isgoing to be. so the bigger you have you have larger diameter of course on thetwist. next things we wanted to do is we need to creating cross section, so I'mgonna use the rectangle and make sure starting from the center and roughlydoing something like gold pendant designs this. Gold pendant designs for female so we can give it a try and see how it goes and adjustfrom there. I'm gonna use the sweep two command. this is rail one, rail two, and I want to record a history and click on thecross section, and as you can see it's getting really really thin over there.since we have a record history so a few things that we can try here.  first,we can try to make it a little bit wider so then you won't have that thing. it canonly stretch into the certain degree. 


Gold pendant designs for female
 pendant designs

You may see this getting really knife edgesthere because of the twist so be really careful if you do that. the second thingis we can also, let me move it back, it easier for you to see. we can kind ofmoving our cross section so you may have the tighter inside, and you knowdifferent kind of a pattern coming out depends on how you'll like it. so I'mgonna stay it right here just make it a little bit thicker. You can also changethe position maybe gold pendant designs make them a little bit taller.  Gold pendant designs for female so you're gonna have thiskind of twist. be careful that may be like twisting too sharp on the edges andsome of them is overlapping so be really careful if it is off-center. so I'm justgonna go back there. and let's say this is what I like. I'm going to stay with thisone. now after I do it, if I feel like I really don't like this triangle area, andthis is an area we try to avoid when we do the casting, because those littletriangle area may create the casting porosity, so we might want to kind of ascale it down. so they can hiding inside of the bezel. 



Gold pendant designs for female
 pendant designs


What we wanted to have istwisting element right there.

 again let's do the helix around a curve. Instead of having 10 (turn) maybe I just want to have six of them to see what is the difference.let's do a little bit comparison right here. so I'm going to have a six of themand then you are going to sweep two. rail one, rail two, cross section, gold pendant designs and you willget something like this. alright so you don't have to always get like a lot andthen you can scale it down again to avoid some casting problem. Gold pendant designs  Let's turnedon the render view to take a look on it. and you might notice some of the surfaceis really really zigzag, and an even surface it doesn'ttell much on our ghost view, you can kind of see a little bit, but it's not reallyclear there. the problem like this it may have two reasons. first of all,  thisis too long, and it's passing as you can see is passing the curve over there. .


Gold pendant designs for female
 pendant designs

Whatyou can do just make them a little bit shorter itis inside of that diameter, so that point is not being repeated showing up. I alsolike to do is fillet the corners. instead will try to fit it edges onthese solid. so I'm going to pick up  gold pendant designs this one and let's pick up the fillet corners,and we are going to do something really small 0.15. it's fine so let'stake a look again we're going Gold pendant designs to use the sweep two rails. rail one, and rail two, andcross section, and then let's turn on a render view, and it's getting muchsmoother surface. 


Gold pendant designs for female
 pendant designs

Okay so if you get what I just had, maybe you're just having atwo peak of the cross section again. we try to avoid this triangle area so whatwe wanted to do is kind of scale this down hiding it inside of the bezel, anddon't forget to  gold pendant designs close the bottom, and don't forget to close the balance sowhat I like to do is pick up this curve and have it extrude straight going throughthe bottom, and we can boolean those too. I usually like to have thisdecoration touching the ground gold pendant designs  so I might want to just want a scale with thegumball. on the top look the same but on this side is just looking much better.it's touching the same bottom. after that you can fillet the edges, and adding abail, adding the chain. this will be great for the rendering. 


Gold pendant designs for female
 pendant designs


Gold pendant designs for female
 pendant designs



Gold pendant designs for female
 pendant designs

Gold pendant designs for female
 pendant designs

Post a Comment

0 Comments

Subscribe!

Get all latest content delivered straight to your inbox.